top of page
single extruder copperhead assembled_750

Professional Grade Extruders for High Temp 3D Printing

The powerful gMax 2 PRO direct drive extruder utilizes high-performance all-metal Slice Engineering® Copperhead™ hotend that is able to print in a variety of industrial grade materials ranging from 85A Flexible TPU to Polycarbonate to Carbon Fiber-Reinforced Nylon. Additional hotends can be swapped out including the E3D v6.

With the gMax 2 PRO 3D printer, easily swap nozzles to suit your project thanks to the universally accepted hotend design.

From high detail to high flow, pick your nozzle without swapping the extruder or hotend!

0.2 mm
0.5 mm
0.8 mm

Fine detail and

slower printing

Course detail and

fast printing

0.8 mm
1.2 mm

High flow printing

Hardened

Hardened nozzles for abrasive materials

Special

Special Nozzles,

Olsson Ruby extreme hardness 

Buy 5-Nozzle Fun Packs Here. 

gtl_building_tiny_750px.jpg

0.2mm Nozzle - Fine Detail

Finer nozzles such as 0.2mm are great for tiny, high detailed prints and work beautifully on the gMax 2 PRO.

 

Sacrifice speed in exchange for greater detail. Smaller nozzles requires care and attention to use well but they are worth the effort if showcasing intricate detail is what you are after. 

1.2 mm Nozzle - Fast Printing

Larger nozzles up to 1.2mm are great for producing large strong parts very quickly. Thanks to a 50 watt heater cartridge using a large nozzle with high plastic flow is a breeze.

 

Depending on your settings, you can see time reductions of up to 75% vs using finer nozzles and parts that are much stronger.

1mm nozzle.jpg

Swap Hotends for High Flow or High Temp

The gMax 2 PRO extruder was designed to fit the common "groove mount" style hotend allowing for many professional and hight quality replacements. From the industry recognized E3D v6 to the high quality Slice Engineering hotends they can all fit on the single extruder.

copperhead assembled_750px.jpg
e3d hotend_sq_750px.jpg
mosquito magnum_750px.jpg
E3D v6 (Compatible)
Slice Engineering® Copperhead™
Slice Engineering® Mosquito®

  • Commonly used in the industry.

  • Print Up to 300°C

  • Swappable Nozzles

  • All-Metal Hotend

  • Readily Available Components

  • Comes Standard on the gMax 2 PRO

  • Print up to 400°C 

  • 50 Watt Heater Cartridge

  • Easy Nozzle Swapping

  • Nickel Plated Copper Alloy Heat Block

  • Bimetallic Heat Break™

  • Mosquito, Mosquito Magnum and Mosquito Magnum + Compatible

  • Print up to 400°C 

  • 50 Watt Heater Cartridge

  • High Flow Printing up to 30 mm³/sec and 80 mm³/sec with the Magnum+

  • Easily Swappable on the gMax 2 PRO Single Extruder

bottom of page