top of page
Polyethylene Terephthalate (PET) is the most commonly used plastic in the world.

Brands Tested

  • Atomic Filament

  • MakeShaper

  • IC3D

  • ColorFabb

  • PolyMaker

  • GreenGate3D

  • TonerPlastics

  • FilamentPM

  • MatterHackers


< Previous

PETG

Polyethylene Terephthalate (PET) is the most commonly used plastic in the world. In 3D printing we use PETG, the  "G" stands for Glycol, an additive which makes the material easier to print and increases its clarity. PETG is a great choice for many applications as it can be as strong as ABS, can be optically clear, has flexibility and is highly impact resistant.

Surface Quality

++++

Strength

++++

Ease of Use

++++

Settings

Speed

(mm/sec)

astro_icon_filament_extruder.png

40-45

Fan

(%)

astro_icon_fan.png

40-45

ExtruderTemp

(Deg C)

astro_icon_preheat.png

235°C-250°C

Bed Temp

(Deg C)

astro_icon_bedtemp.png

55°C-70°C

Retraction

(mm)

gcreate_icon_unload_filament.png

1.0

Additional Recommendations

Start print at 245°C and on the third layer, lower it to 235°C.
Prints better with no cooling fan.
Use a heated bed or GeckoTek cold to print.
Slow printing is recommended.

Next >
bottom of page